Description: This class will teach you the basic safety procedures and techniques to cut and etch a variety of materials on the laser cutters at MakeATX. This class is required for all individuals wishing to use the laser cutter independently (and it's also lots of fun)! You'll take away your very own laser-cut souvenir!

Duration: 3 1/2 hours

Material requirements: None

Prerequisites: None (though some graphics software knowledge may be helpful)

Attendance and cancellation policies: Please note refunds are available to those who cancel with at least 72 hour notice. 

If you’re feeling unwell, please stay home! Class credit shall be granted to those who cancel less than 72 hours before the start of class. To ensure we are able to cover all material in a timely manner, students must arrive promptly. Tardiness of more than 15 minutes will result in a student forfeiting his or her place in the class.

Parking: After hours parking for class attendees is available in the reserved spaces on the north side of the building. If you choose to park on the street, please avoid parking in front of our residential neighbors!

If you know someone who might enjoy this class, you can purchase a $90 gift certificate for them here: makeatx.com/ecommerce-shop/gift-card

Description: This class will teach you the basic safety procedures and techniques to cut and etch a variety of materials on the laser cutters at MakeATX. This class is required for all individuals wishing to use the laser cutter independently (and it's also lots of fun)! You'll take away your very own laser-cut souvenir!

Duration: 3 1/2 hours

Material requirements: None

Prerequisites: None (though some graphics software knowledge may be helpful)

Attendance and cancellation policies: Please note refunds are available to those who cancel with at least 72 hour notice. 

If you’re feeling unwell, please stay home! Class credit shall be granted to those who cancel less than 72 hours before the start of class. To ensure we are able to cover all material in a timely manner, students must arrive promptly. Tardiness of more than 15 minutes will result in a student forfeiting his or her place in the class.

Parking: Limited parking for class attendees is available in the reserved spaces 27-30 on the north side of the building. If you choose to park on the street, please avoid parking in front of our residential neighbors!

If you know someone who might enjoy this class, you can purchase a $90 gift certificate for them here: makeatx.com/ecommerce-shop/gift-card

Description: This class will teach you the basic safety procedures and techniques to cut and etch a variety of materials on the laser cutters at MakeATX. This class is required for all individuals wishing to use the laser cutter independently (and it's also lots of fun)! You'll take away your very own laser-cut souvenir!

Duration: 3 1/2 hours

Material requirements: None

Prerequisites: None (though some graphics software knowledge may be helpful)

Attendance and cancellation policies: Please note refunds are available to those who cancel with at least 72 hour notice. 

If you’re feeling unwell, please stay home! Class credit shall be granted to those who cancel less than 72 hours before the start of class. To ensure we are able to cover all material in a timely manner, students must arrive promptly. Tardiness of more than 15 minutes will result in a student forfeiting his or her place in the class.

Parking: Limited parking for class attendees is available in the reserved spaces 27-30 on the north side of the building. If you choose to park on the street, please avoid parking in front of our residential neighbors!

If you know someone who might enjoy this class, you can purchase a $90 gift certificate for them here: makeatx.com/ecommerce-shop/gift-card

Description: This class will teach you the basic safety procedures and techniques to cut and etch a variety of materials on the laser cutters at MakeATX. This class is required for all individuals wishing to use the laser cutter independently (and it's also lots of fun)! You'll take away your very own laser-cut souvenir!

Duration: 3 1/2 hours

Material requirements: None

Prerequisites: None (though some graphics software knowledge may be helpful)

Attendance and cancellation policies: Please note refunds are available to those who cancel with at least 72 hour notice. 

If you’re feeling unwell, please stay home! Class credit shall be granted to those who cancel less than 72 hours before the start of class. To ensure we are able to cover all material in a timely manner, students must arrive promptly. Tardiness of more than 15 minutes will result in a student forfeiting his or her place in the class.

Parking: After hours parking for class attendees is available in the reserved spaces on the north side of the building. If you choose to park on the street, please avoid parking in front of our residential neighbors!

If you know someone who might enjoy this class, you can purchase a $90 gift certificate for them here: makeatx.com/ecommerce-shop/gift-card

Description: Have fun laser cutting a gingerbread diorama kit, a set of festive coasters, or your own holiday ornaments. Each participant will get to laser cut one of those projects, though additional projects can be laser cut at the event for $15 each.

In addition to your laser cut project, you’ll also get to indulge in some tasty hot cocoa. Let’s keep the elves at Santa’s workshop happy and hydrated!

Already have a custom holiday project in mind? Send an email to orders@makeatx.com and we can help you figure out all of the laser cutting and material details in advance of the event.

Attendance and cancellation policies: Attendants can come and go as they please between 2pm-5pm. Please note refunds are available to those who cancel with at least 72 hour notice. If you’re feeling unwell, please stay home! We will refund your attendance fee in the case that you need to say home.

Location: MakeATX is a beautiful laser cutting studio located in downtown Austin, just two blocks east of I35. Our studio is nestled near the food trucks at Arbor Food Park.

Parking: After hours parking for class attendees is available in the reserved spaces on the north side of the building. If you choose to park on the street, please avoid parking in front of our residential neighbors!

Description: This class will teach you the basic safety procedures and techniques to cut and etch a variety of materials on the laser cutters at MakeATX. This class is required for all individuals wishing to use the laser cutter independently (and it's also lots of fun)! You'll take away your very own laser-cut souvenir!

Duration: 3 1/2 hours

Material requirements: None

Prerequisites: None (though some graphics software knowledge may be helpful)

Attendance and cancellation policies: Please note refunds are available to those who cancel with at least 72 hour notice. 

If you’re feeling unwell, please stay home! Class credit shall be granted to those who cancel less than 72 hours before the start of class. To ensure we are able to cover all material in a timely manner, students must arrive promptly. Tardiness of more than 15 minutes will result in a student forfeiting his or her place in the class.

Parking: Limited parking for class attendees is available in the reserved spaces 27-30 on the north side of the building. If you choose to park on the street, please avoid parking in front of our residential neighbors!

Description: Table top games have had a resurgence among adults who played in their youth and kids who are just getting started. If you're looking to make your next campaign the best yet, this is the workshop for you! In this workshop, participants will learn laser basics and create a custom piece to add to their table top gaming experience. Want a customized dice tower? Or a dice box engraved with your favorite saying? Interested in making your own laser cut dice jail? Sign up now!

Duration: 3 hours

What you’ll get: Custom tabletop game accessories. Participants can create 1 of 3 projects; dice tower, dice box, or dice jail.

Prerequisites: None (though some graphics software knowledge may be helpful)

What to bring: We provide the materials. Snacks and BYOB welcome.

Attendance and cancellation policies: Please note refunds are available to those who cancel with at least 72 hour notice. 

If you’re feeling unwell, please stay home! Class credit shall be granted to those who cancel less than 72 hours before the start of class. To ensure we are able to cover all material in a timely manner, students must arrive promptly. Tardiness of more than 15 minutes will result in a student forfeiting his or her place in the class.

Location: MakeATX is a beautiful laser cutting studio located in downtown Austin, just two blocks east of I35. Our studio is nestled near the food trucks at Arbor Food Park. Hot tea, sparkling water, and relaxing music provided by MakeATX.

Parking: After hours parking for class attendees is available in the reserved spaces on the north side of the building. If you choose to park on the street, please avoid parking in front of our residential neighbors!

If you know someone who might enjoy this class, you can purchase a $60 gift certificate for them here: makeatx.com/ecommerce-shop/gift-card

Description: This class will teach you the basic safety procedures and techniques to cut and etch a variety of materials on the laser cutters at MakeATX. This class is required for all individuals wishing to use the laser cutter independently (and it's also lots of fun)! You'll take away your very own laser-cut souvenir!

Duration: 3 1/2 hours

Material requirements: None

Prerequisites: None (though some graphics software knowledge may be helpful)

Attendance and cancellation policies: Please note refunds are available to those who cancel with at least 72 hour notice. 

If you’re feeling unwell, please stay home! Class credit shall be granted to those who cancel less than 72 hours before the start of class. To ensure we are able to cover all material in a timely manner, students must arrive promptly. Tardiness of more than 15 minutes will result in a student forfeiting his or her place in the class.

Parking: After hours parking for class attendees is available in the reserved spaces on the north side of the building. If you choose to park on the street, please avoid parking in front of our residential neighbors!

Description: Have fun laser engraving and making custom masks, costume props, festive home decor, and more! Each participant will get to laser cut one project using materials that we have on hand (paper, felt, cardboard, and wood), and extra materials will be available for purchase should someone want to laser cut something special.

In addition to your custom project, you’ll also get to engrave your own spooky s’more. Who knew laser cutting could be so fun, and so delicious!?

Already have a custom project in mind? Send an email to orders@makeatx.com and we can help you figure out all of the laser cutting and material details in advance of the event.

Attendance and cancellation policies: Please note refunds are available to those who cancel with at least 72 hour notice. If you’re feeling unwell, please stay home! We will refund your attendance fee in the case that you need to say home.

Location: MakeATX is a beautiful laser cutting studio located in downtown Austin, just two blocks east of I35. Our studio is nestled near the food trucks at Arbor Food Park.

Parking: After hours parking for class attendees is available in the reserved spaces on the north side of the building. If you choose to park on the street, please avoid parking in front of our residential neighbors!

Description: Mellow out and make your own meditative mandalas! In this class you will learn how to create a mandala design in Adobe Illustrator, which you will then laser cut into a beautiful decorative piece with the help of our talented designers and shop attendants.

These wooden mandalas are designed to be colored - a fun activity that brings out your inner artist while calming the mind. Mandalas can be used as tabletop centerpieces or mounted on walls; we will provide jigs, mounting brackets and instructions as needed. BYOB optional.

Duration: 3 hours

What you’ll get: A wooden, laser cut decorative mandala designed and painted by you! Mandalas can be used as tablet top centerpieces or mounted on walls; we will provide jigs, mounting brackets and instructions as needed.

Prerequisites: None (though some graphics software knowledge may be helpful)

Attendance and cancellation policies: Please note refunds are available to those who cancel with at least 72 hour notice. 

If you’re feeling unwell, please stay home! Class credit shall be granted to those who cancel less than 72 hours before the start of class. To ensure we are able to cover all material in a timely manner, students must arrive promptly. Tardiness of more than 15 minutes will result in a student forfeiting his or her place in the class.

Location: MakeATX is a beautiful laser cutting studio located in downtown Austin, just two blocks east of I35. Our studio is nestled near the food trucks at Arbor Food Park. Hot tea, sparkling water, and relaxing music provided by MakeATX.

Parking: After hours parking for class attendees is available in the reserved spaces on the north side of the building. If you choose to park on the street, please avoid parking in front of our residential neighbors!

Description: This class will teach you the basic safety procedures and techniques to cut and etch a variety of materials on the laser cutters at MakeATX. This class is required for all individuals wishing to use the laser cutter independently (and it's also lots of fun)! You'll take away your very own laser-cut souvenir!

Duration: 3 1/2 hours

Material requirements: None

Prerequisites: None (though some graphics software knowledge may be helpful)

Attendance and cancellation policies: Please note refunds are available to those who cancel with at least 72 hour notice. 

If you’re feeling unwell, please stay home! Class credit shall be granted to those who cancel less than 72 hours before the start of class. To ensure we are able to cover all material in a timely manner, students must arrive promptly. Tardiness of more than 15 minutes will result in a student forfeiting his or her place in the class.

Parking: Limited parking for class attendees is available in the reserved spaces 27-30 on the north side of the building. If you choose to park on the street, please avoid parking in front of our residential neighbors!

Description: Table top games have had a resurgence among adults who played in their youth and kids who are just getting started. If you're looking to make your next campaign the best yet, this is the workshop for you! In this workshop, participants will learn laser basics and create a custom piece to add to their table top gaming experience. Want a custom dice jail or a dice box engraved with your favorite saying? Sign up now!

Duration: 2 hours

What you’ll get: Custom tabletop game accessories. Participants can create 1 of 3 projects; dice box, dice jail, or a dice holder.

Prerequisites: None (though some graphics software knowledge may be helpful)

What to bring: We provide the materials. Snacks and BYOB welcome.

Attendance and cancellation policies: Please note refunds are available to those who cancel with at least 72 hour notice. 

If you’re feeling unwell, please stay home! Class credit shall be granted to those who cancel less than 72 hours before the start of class. To ensure we are able to cover all material in a timely manner, students must arrive promptly. Tardiness of more than 15 minutes will result in a student forfeiting his or her place in the class.

Location: MakeATX is a beautiful laser cutting studio located in downtown Austin, just two blocks east of I35. Our studio is nestled near the food trucks at Arbor Food Park. Hot tea, sparkling water, and relaxing music provided by MakeATX.

Parking: After hours parking for class attendees is available in the reserved spaces on the north side of the building. If you choose to park on the street, please avoid parking in front of our residential neighbors!

Description: This class will teach you the basic safety procedures and techniques to cut and etch a variety of materials on the laser cutters at MakeATX. This class is required for all individuals wishing to use the laser cutter independently (and it's also lots of fun)! You'll take away your very own laser-cut souvenir!

Duration: 3 1/2 hours

Material requirements: None

Prerequisites: None (though some graphics software knowledge may be helpful)

Attendance and cancellation policies: Please note refunds are available to those who cancel with at least 72 hour notice. 

If you’re feeling unwell, please stay home! Class credit shall be granted to those who cancel less than 72 hours before the start of class. To ensure we are able to cover all material in a timely manner, students must arrive promptly. Tardiness of more than 15 minutes will result in a student forfeiting his or her place in the class.

Parking: Limited parking for class attendees is available in the reserved spaces 27-30 on the north side of the building. If you choose to park on the street, please avoid parking in front of our residential neighbors!

Description: This class will teach you the basic safety procedures and techniques to cut and etch a variety of materials on the laser cutters at MakeATX. This class is required for all individuals wishing to use the laser cutter independently (and it's also lots of fun)! You'll take away your very own laser-cut souvenir!

Duration: 3 1/2 hours

Material requirements: None

Prerequisites: None (though some graphics software knowledge may be helpful)

Attendance and cancellation policies: Please note refunds are available to those who cancel with at least 72 hour notice. 

If you’re feeling unwell, please stay home! Class credit shall be granted to those who cancel less than 72 hours before the start of class. To ensure we are able to cover all material in a timely manner, students must arrive promptly. Tardiness of more than 15 minutes will result in a student forfeiting his or her place in the class.

Parking: After hours parking for class attendees is available in the reserved spaces on the north side of the building. If you choose to park on the street, please avoid parking in front of our residential neighbors!

Description: This class will teach you the basic safety procedures and techniques to cut and etch a variety of materials on the laser cutters at MakeATX. This class is required for all individuals wishing to use the laser cutter independently (and it's also lots of fun)! You'll take away your very own laser-cut souvenir!

Duration: 3 1/2 hours

Material requirements: None

Prerequisites: None (though some graphics software knowledge may be helpful)

Attendance and cancellation policies: Please note refunds are available to those who cancel with at least 72 hour notice. 

If you’re feeling unwell, please stay home! Class credit shall be granted to those who cancel less than 72 hours before the start of class. To ensure we are able to cover all material in a timely manner, students must arrive promptly. Tardiness of more than 15 minutes will result in a student forfeiting his or her place in the class.

Parking: Limited parking for class attendees is available in the reserved spaces 27-30 on the north side of the building. If you choose to park on the street, please avoid parking in front of our residential neighbors!

Description: This class will teach you the basic safety procedures and techniques to cut and etch a variety of materials on the laser cutters at MakeATX. This class is required for all individuals wishing to use the laser cutter independently (and it's also lots of fun)! You'll take away your very own laser-cut souvenir!

Duration: 3 1/2 hours

Material requirements: None

Prerequisites: None (though some graphics software knowledge may be helpful)

Attendance and cancellation policies: Please note refunds are available to those who cancel with at least 72 hour notice. 

If you’re feeling unwell, please stay home! Class credit shall be granted to those who cancel less than 72 hours before the start of class. To ensure we are able to cover all material in a timely manner, students must arrive promptly. Tardiness of more than 15 minutes will result in a student forfeiting his or her place in the class.

Parking: Limited parking for class attendees is available in the reserved spaces 27-30 on the north side of the building. If you choose to park on the street, please avoid parking in front of our residential neighbors!

Description: This class will teach you the basic safety procedures and techniques to cut and etch a variety of materials on the laser cutters at MakeATX. This class is required for all individuals wishing to use the laser cutter independently (and it's also lots of fun)! You'll take away your very own laser-cut souvenir!

Duration: 3 1/2 hours

Material requirements: None

Prerequisites: None (though some graphics software knowledge may be helpful)

Attendance and cancellation policies: Please note refunds are available to those who cancel with at least 72 hour notice. 

If you’re feeling unwell, please stay home! Class credit shall be granted to those who cancel less than 72 hours before the start of class. To ensure we are able to cover all material in a timely manner, students must arrive promptly. Tardiness of more than 15 minutes will result in a student forfeiting his or her place in the class.

Parking: After hours parking for class attendees is available in the reserved spaces on the north side of the building. If you choose to park on the street, please avoid parking in front of our residential neighbors!

Description: This class will teach you the basic safety procedures and techniques to cut and etch a variety of materials on the laser cutters at MakeATX. This class is required for all individuals wishing to use the laser cutter independently (and it's also lots of fun)! You'll take away your very own laser-cut souvenir!

Duration: 3 1/2 hours

Material requirements: None

Prerequisites: None (though some graphics software knowledge may be helpful)

Attendance and cancellation policies: Please note refunds are available to those who cancel with at least 72 hour notice. 

If you’re feeling unwell, please stay home! Class credit shall be granted to those who cancel less than 72 hours before the start of class. To ensure we are able to cover all material in a timely manner, students must arrive promptly. Tardiness of more than 15 minutes will result in a student forfeiting his or her place in the class.

Parking: Limited parking for class attendees is available in the reserved spaces 27-30 on the north side of the building. If you choose to park on the street, please avoid parking in front of our residential neighbors!

Join us on Friday, May 26th from 6-9pm for our Grand Reopening Party. We’ll have games, giveaways, laser and crafting activities, refreshments and cheer. Kids are welcome! Please RSVP so we know how much food to prepare and how many goody bags to assemble. We’d be honored if you’d help us warm our newly reopened studio space.

Parking is available in the lot behind the studio (on the alley between San Bernard and Navasota, north of 12th Street).

Description: This class will teach you the basic safety procedures and techniques to cut and etch a variety of materials on the laser cutters at MakeATX. This class is required for all individuals wishing to use the laser cutter independently (and it's also lots of fun)! You'll take away your very own laser-cut souvenir!

Duration: 3 1/2 hours

Material requirements: None

Prerequisites: None (though some graphics software knowledge may be helpful)

Attendance and cancellation policies: Please note refunds are available to those who cancel with at least 72 hour notice. 

If you’re feeling unwell, please stay home! Class credit shall be granted to those who cancel less than 72 hours before the start of class. To ensure we are able to cover all material in a timely manner, students must arrive promptly. Tardiness of more than 15 minutes will result in a student forfeiting his or her place in the class.

Parking: Limited parking for class attendees is available in the reserved spaces 27-30 on the north side of the building. If you choose to park on the street, please avoid parking in front of our residential neighbors!

Description: This class will teach you the basic safety procedures and techniques to cut and etch a variety of materials on the laser cutters at MakeATX. This class is required for all individuals wishing to use the laser cutter independently (and it's also lots of fun)! You'll take away your very own laser-cut souvenir!

Duration: 3 1/2 hours

Material requirements: None

Prerequisites: None (though some graphics software knowledge may be helpful)

Attendance and cancellation policies: Please note refunds are available to those who cancel with at least 72 hour notice. 

If you’re feeling unwell, please stay home! Class credit shall be granted to those who cancel less than 72 hours before the start of class. To ensure we are able to cover all material in a timely manner, students must arrive promptly. Tardiness of more than 15 minutes will result in a student forfeiting his or her place in the class.

Parking: Limited parking for class attendees is available in the reserved spaces 27-30 on the north side of the building. If you choose to park on the street, please avoid parking in front of our residential neighbors!

Description: This class will teach you the basic safety procedures and techniques to cut and etch a variety of materials on the laser cutters at MakeATX. This class is required for all individuals wishing to use the laser cutter independently (and it's also lots of fun)! You'll take away your very own laser-cut souvenir!

Duration: 3 1/2 hours

Material requirements: None

Prerequisites: None (though some graphics software knowledge may be helpful)

Attendance and cancellation policies: Please note refunds are available to those who cancel with at least 72 hour notice. 

If you’re feeling unwell, please stay home! Class credit shall be granted to those who cancel less than 72 hours before the start of class. To ensure we are able to cover all material in a timely manner, students must arrive promptly. Tardiness of more than 15 minutes will result in a student forfeiting his or her place in the class.

Parking: Limited parking for class attendees is available in the reserved spaces 27-30 on the north side of the building. If you choose to park on the street, please avoid parking in front of our residential neighbors!

Description: This class will teach you the basic safety procedures and techniques to cut and etch a variety of materials on the laser cutters at MakeATX. This class is required for all individuals wishing to use the laser cutter independently (and it's also lots of fun)! You'll take away your very own laser-cut souvenir!

Duration: 3 1/2 hours

Material requirements: None

Prerequisites: None (though some graphics software knowledge may be helpful)

Attendance and cancellation policies: Please note refunds are available to those who cancel with at least 72 hour notice. 

If you’re feeling unwell, please stay home! Class credit shall be granted to those who cancel less than 72 hours before the start of class. To ensure we are able to cover all material in a timely manner, students must arrive promptly. Tardiness of more than 15 minutes will result in a student forfeiting his or her place in the class.

Parking: After hours parking for class attendees is available in the reserved spaces on the north side of the building. If you choose to park on the street, please avoid parking in front of our residential neighbors!

Description: This class will teach you the basic safety procedures and techniques to cut and etch a variety of materials on the laser cutters at MakeATX. This class is required for all individuals wishing to use the laser cutter independently (and it's also lots of fun)! You'll take away your very own laser-cut souvenir!

Duration: 3 1/2 hours

Material requirements: None

Prerequisites: None (though some graphics software knowledge may be helpful)

Attendance and cancellation policies: Please note refunds are available to those who cancel with at least 72 hour notice. 

If you’re feeling unwell, please stay home! Class credit shall be granted to those who cancel less than 72 hours before the start of class. To ensure we are able to cover all material in a timely manner, students must arrive promptly. Tardiness of more than 15 minutes will result in a student forfeiting his or her place in the class.

Parking: After hours parking for class attendees is available in the reserved spaces on the north side of the building. If you choose to park on the street, please avoid parking in front of our residential neighbors!

Description: This class will teach you the basic safety procedures and techniques to cut and etch a variety of materials on the laser cutters at MakeATX. This class is required for all individuals wishing to use the laser cutter independently (and it's also lots of fun)! You'll take away your very own laser-cut souvenir!

Duration: 3 1/2 hours

Material requirements: None

Prerequisites: None (though some graphics software knowledge may be helpful)

Attendance and cancellation policies: Please note refunds are available to those who cancel with at least 72 hour notice. 

If you’re feeling unwell, please stay home! Class credit shall be granted to those who cancel less than 72 hours before the start of class. To ensure we are able to cover all material in a timely manner, students must arrive promptly. Tardiness of more than 15 minutes will result in a student forfeiting his or her place in the class.

Parking: Limited parking for class attendees is available in the reserved spaces 27-30 on the north side of the building. If you choose to park on the street, please avoid parking in front of our residential neighbors!

Description: This class will teach you the basic safety procedures and techniques to cut and etch a variety of materials on the laser cutters at MakeATX. This class is required for all individuals wishing to use the laser cutter independently (and it's also lots of fun)! You'll take away your very own laser-cut souvenir!

Duration: 3 1/2 hours

Material requirements: None

Prerequisites: None (though some graphics software knowledge may be helpful)

Attendance and cancellation policies: Please note refunds are available to those who cancel with at least 72 hour notice. 

If you’re feeling unwell, please stay home! Class credit shall be granted to those who cancel less than 72 hours before the start of class. To ensure we are able to cover all material in a timely manner, students must arrive promptly. Tardiness of more than 15 minutes will result in a student forfeiting his or her place in the class.

Parking: Limited parking for class attendees is available in the reserved spaces 27-30 on the north side of the building. If you choose to park on the street, please avoid parking in front of our residential neighbors!

Description: This class will teach you the basic safety procedures and techniques to cut and etch a variety of materials on the laser cutters at MakeATX. This class is required for all individuals wishing to use the laser cutter independently (and it's also lots of fun)! You'll take away your very own laser-cut souvenir!

Duration: 3 1/2 hours

Material requirements: None

Prerequisites: None (though some graphics software knowledge may be helpful)

Attendance and cancellation policies: Please note refunds are available to those who cancel with at least 72 hour notice. 

If you’re feeling unwell, please stay home! Class credit shall be granted to those who cancel less than 72 hours before the start of class. To ensure we are able to cover all material in a timely manner, students must arrive promptly. Tardiness of more than 15 minutes will result in a student forfeiting his or her place in the class.

Parking: Limited parking for class attendees is available in the reserved spaces 27-30 on the north side of the building. If you choose to park on the street, please avoid parking in front of our residential neighbors!

Description: This class will teach you the basic safety procedures and techniques to cut and etch a variety of materials on the laser cutters at MakeATX. This class is required for all individuals wishing to use the laser cutter independently (and it's also lots of fun)! You'll take away your very own laser-cut souvenir!

Duration: 3 1/2 hours

Material requirements: None

Prerequisites: None (though some graphics software knowledge may be helpful)

Attendance and cancellation policies: Please note refunds are available to those who cancel with at least 72 hour notice. 

If you’re feeling unwell, please stay home! Class credit shall be granted to those who cancel less than 72 hours before the start of class. To ensure we are able to cover all material in a timely manner, students must arrive promptly. Tardiness of more than 15 minutes will result in a student forfeiting his or her place in the class.

Parking: Limited parking for class attendees is available in the reserved spaces 27-30 on the north side of the building. If you choose to park on the street, please avoid parking in front of our residential neighbors!

Description: This class will teach you the basic safety procedures and techniques to cut and etch a variety of materials on the laser cutters at MakeATX. This class is required for all individuals wishing to use the laser cutter independently (and it's also lots of fun)! You'll take away your very own laser-cut souvenir!

Duration: 3 1/2 hours

Material requirements: None

Prerequisites: None (though some graphics software knowledge may be helpful)

Attendance and cancellation policies: Please note refunds are available to those who cancel with at least 72 hour notice. 

If you’re feeling unwell, please stay home! Class credit shall be granted to those who cancel less than 72 hours before the start of class. To ensure we are able to cover all material in a timely manner, students must arrive promptly. Tardiness of more than 15 minutes will result in a student forfeiting his or her place in the class.

Parking: Limited parking for class attendees is available in the reserved spaces 27-30 on the north side of the building. If you choose to park on the street, please avoid parking in front of our residential neighbors!

Description: This class will teach you the basic safety procedures and techniques to cut and etch a variety of materials on the laser cutters at MakeATX. This class is required for all individuals wishing to use the laser cutter independently (and it's also lots of fun)! You'll take away your very own laser-cut souvenir!

Duration: 3 1/2 hours

Material requirements: None

Prerequisites: None (though some graphics software knowledge may be helpful)

Attendance and cancellation policies: Please note refunds are available to those who cancel with at least 72 hour notice. 

If you’re feeling unwell, please stay home! Class credit shall be granted to those who cancel less than 72 hours before the start of class. To ensure we are able to cover all material in a timely manner, students must arrive promptly. Tardiness of more than 15 minutes will result in a student forfeiting his or her place in the class.

Parking: After hours parking for class attendees is available in the reserved spaces on the north side of the building. If you choose to park on the street, please avoid parking in front of our residential neighbors!